Zum Verlag wechseln.
Mo-Do 08:00-17:00Fr 08:00-14:00
DVGW-Regelwerk Online Plus
Jetzt auch bequem mobil verfügbar – egal ob auf Tablet oder Smartphone.
Mehr Infos: Tel.: 0228 9191-40 oder www.dvgw-regelwerk.de
Gas Quality ++ PDF file ++
G 260 Technicak Rule serves as the basis for the gas quality of fuel gas used in the supply of gas to the general public. Gases from regenerative sources receive special attention due to the consequences of climate protection. The requirements for the quality of gases used in the supply of the general public with gas have been adjusted to the developments as technical rules multiple times.
Tapping and Shutting Off; Part 3: Squeezing off Plastic Pipelines for Gas with Pressures above 5 bar and up to 16 bar and Outer Diameter to 225 mm ++ PDF file ++
This Guideline G 452-3 applies, in addition to DVGW G 452-2 (A):2020-08, to the temporary squeezing off (usedfor tie-ins or emergency maintenance) of plastic pipelines for gas distribution (containing between 0 and100 per cent hydrogen by volume) for pressures above 5 bar (0.5 MPa) up to 16 bar (1.6 MPa) duringsqueeze-off and outside diameters up to 225 mm.
Tapping and Shutting Off; Part 2: Squeezing off Plastic Pipelines for Gas with Pressures up to 5 bar and Outer Diameters up to 315 mm ++ PDF file ++
This Standard G 452-2 applies to the temporary squeezing off (used for tie-ins or emergency maintenance) of plas-tic pipelines for gas distribution (containing between 0 and 100 per cent hydrogen by volume) for pressuresup to 5 bar (0.5 MPa) during squeeze-off (including the possibility of a temporary pressure reduction atotherwise higher operating pressures) and outside diameters up to 315 mm (see Clause 5 for other case-specific application Limits).
Odorization of Gases ++ PDF file ++
G 280 Technica Rule serves as the basis for the odorization of gases for the supply of the general public.
Cathodic protection of buriedgas distribution networks and gas distribution pipelines ++ PDF file ++
This standard G 412 applies to the planning and establishment of cathodic protection for the construction ofnew buried gas distribution networks consisting of steel pipelines with an operating pressure up to 5 barand for the retrofitting of cathodic protection in existing steel pipeline distribution networks.
Methods for detection, valuation, treatment and avoidance of dents on high pressure pipelines ++ PDF file ++
This DVGW Guideline G 473 contains recommendations for the detection, assessment, treatment and avoidanceof dents on high pressure gas pipeline made from steel with an operating pressure of greater than 16 barwhich are subjected to predominantly static loads and which are meant for the transportation of gases asdefined by DVGW Code of Practice G 260.
© wvgw mbH | Josef-Wirmer-Straße 3 | 53123 Bonn